Allied Telesis IE340 Series - mls qos queue name

C613-50631-01 Rev A Command Reference for IE340 Series 2136
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
MLS
QOS QUEUE NAME
mls qos queue name
Overview Use this command to give a name and optional description to a specific egress
queue.
Use the no variant of this command to remove the name and description from an
egress queue.
Syntax
mls qos queue <0-7> name <name> [description <description>]
no mls qos queue <0-7> name
Default Queues have no name or description
Mode Global Configuration
Example To give queue 6 the name ‘Video’ and the description ‘Real-time interactive,
broadcast video’, use the commands:
awplus# configure terminal
awplus(config)# mls qos queue 6 name Video description Real-time
interactive, broadcast video
To remove the name and description from queue 6, use the commands:
awplus# configure terminal
awplus(config)# no mls qos queue 6 name
Command
changes
Version 5.5.2-2.1: command added
Parameter Description
<0-7> The number of the egress queue to name.
<name> The name you want to give the egress queue. The name can
contain any printable ASCII character (ASCII 33-126), except for
spaces.
<description> The description you want to give the egress queue. The
description can contain any printable ASCII character (ASCII
32-126), including spaces.