Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2155
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
SHOW
MLS QOS INTERFACE QUEUE-COUNTERS
show mls qos interface queue-counters
Overview This command displays an interface’s egress queue counters. This can either be for
a specific queue or for all queues on the interface. If no queue is specified all queue
counters on the interface will be displayed.
The counters show the number of frames currently in the queue and the maximum
number of frames allowed in the queue, for individual egress queues and the port’s
queue (which will be a sum of all egress queues).
Syntax
show mls qos interface <port> queue-counters [queue <0-7>]
Mode User Exec and Privileged Exec
Example To show the counters for all queues on port1.0.1, use the command:
awplus# show mls qos interface port1.0.1 queue-counters
Output Figure 42-6: Example output from show mls qos interface queue-counters
Parameter Description
<port> The switch port to display counters for.
queue <0-7> The number of the queue to display counters for.

Interface port1.0.1 Queue Counters:
Port queue length 1169
Egress Queue length:
Queue 0 0
Queue 1 0
Queue 2 1169
Queue 3 0
Queue 4 0
Queue 5 0
Queue 6 0
Queue 7 0

Egress queue drop/transmit counters:
Dropped Bytes Dropped Pkts Tx Bytes Tx Pkts
Queue 0 0 0 0 0
Queue 1 0 0 0 0
Queue 2 0 0 0 0
Queue 3 0 0 0 0
Queue 4 0 0 576 9
Queue 5 0 0 0 0
Queue 6 0 0 10489664 63901
Queue 7 0 0 0 0

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English