Allied Telesis IE340 Series - show running-config trigger

C613-50631-01 Rev A Command Reference for IE340 Series 3374
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TRIGGER COMMANDS
SHOW
RUNNING-CONFIG TRIGGER
show running-config trigger
Overview This command displays the current running configuration of the trigger utility.
Syntax
show running-config trigger
Mode Privileged Exec
Example To display the current configuration of the trigger utility, use the command:
awplus# show running-config trigger
Output Figure 67-2: Example output from the show running-config trigger command
Related
commands
show trigger

trigger 1
type card in

type usb in
trigger 2

type usb out
!