Allied Telesis IE340 Series - mac address-table acquire

C613-50631-01 Rev A Command Reference for IE340 Series 583
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SWITCHING COMMANDS
MAC
ADDRESS-TABLE ACQUIRE
mac address-table acquire
Overview Use this command to enable MAC address learning on the device.
Use the no variant of this command to disable learning.
Syntax
mac address-table acquire
no mac address-table acquire
Default Learning is enabled by default for all instances.
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# mac address-table acquire