Allied Telesis IE340 Series - show ipv6 rip

C613-50631-01 Rev A Command Reference for IE340 Series 1097
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RIPNG FOR IPV6 COMMANDS
SHOW
IPV6 RIP
show ipv6 rip
Overview Use this command to show RIPng routes.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 rip
Mode User Exec and Privileged Exec
Example To display RIPng routes, use the following command:
awplus# show ipv6 rip
Output Figure 27-2: Example output from the show ipv6 rip command
Related
commands
show ipv6 rip database
awplus#show ipv6 rip
Codes: R - RIP, Rc - RIP connected, Rs - RIP static, Ra - RIP 
aggregated, Rcx - RIP connect suppressed, Rsx - RIP static 
suppressed, C - Connected, S - Static, O - OSPF, B - BGP

Network Next Hop If Met Tag Time

R 2001:db8:1::/48 2001:db8:2::/48 vlan3 3 0 02:28
C 2001:db8:3::/48 :: vlan2 1 0
Ra 2001:db8:4::/48 -- 1 0
Rs 2001:db8:5::/48 2001:db8:1::/48 vlan3 3 0 02:32
Cs 2001:db8:6::/48 :: vlan3 1 0