C613-50631-01 Rev A Command Reference for IE340 Series 2111
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
CLEAR
MLS QOS INTERFACE POLICER-COUNTERS
clear mls qos interface policer-counters
Overview Resets an interface’s policer counters to zero. You can either clear a specific
class-map, or you can clear all class-maps by not specifying a class map.
Syntax
clear mls qos interface <port> policer-counters [class-map
<class-map>]
Mode Privileged Exec
Example To reset the policy counters to zero for all class-maps for port1.0.4, use the
command:
awplus# clear mls qos interface port1.0.4 policer-counters
Related
commands
show mls qos interface policer-counters
Parameter Description
<port> The port may be a switch port (e.g. port1.0.4), a static channel
group (e.g. sa3), or a dynamic (LACP) channel group (e.g. po4).
class-map Select a class-map.
<class-map> Class-map name.
To Next Page
Loading...
Need help?
General
