C613-50631-01 Rev A Command Reference for IE340 Series 2493
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOCAL RADIUS SERVER COMMANDS
SHOW
RADIUS LOCAL-SERVER NAS
show radius local-server nas
Overview Use this command to display information about NAS (Network Access Servers)
registered to the local RADIUS server.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show radius local-server nas [<ip-address>]
Mode User Exec and Privileged Exec
Example The following command displays NAS information.
awplus# show radius local-server nas
Output
Related
commands
nas
Parameter Description
<ip-address> Specify NAS IP address for show output.
Table 3: Example output from the show radius local-server nas command
NAS-Address Shared-Keyď€
----------------------------------------------------------ď€
127.0.0.1 awplus-local-radius-serverď€
Table 4: Parameters in the output of the show radius local-server nas
command
Parameter Description
NAS-Address IP address of NAS.
Shared-Key Shared key used for RADIUS connection.
To Next Page
Loading...
Need help?
General
