Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 123
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CLI NAVIGATION COMMANDS
EXIT
exit
Overview This command exits the current mode, and returns the prompt to the mode at the
previous level. When used in User Exec mode, the exit command terminates the
session.
Syntax
exit
Mode All command modes, including Interface Configuration and Global Configuration
modes.
Example The following example shows the use of the exit command to exit Interface
Configuration mode and return to Global Configuration mode.
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# exit
awplus(config)#
Related
commands
disable (Privileged Exec mode)
enable (Privileged Exec mode)
end

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English