C613-50631-01 Rev A Command Reference for IE340 Series 2711
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
G
8032 ERP-INSTANCE
g8032 erp-instance
Overview Use this command to create a G.8032 Ethernet Ring Protection (ERP) instance, or to
enter an existing instance's context.
Use the no variant of this command to destroy the specified instance.
Syntax
g8032 erp-instance <erp-instance-name>
no g8032 erp-instance <erp-instance-name>
Mode Global Configuration
Usage notes The ERP protocol in AlliedWare Plus™ can run one or more instances. A G.8032 ERP
instance is made up of:
•two ERP ring ports,
• a Control VLAN that carries Ring-Automatic Protection Switching (R-APS)
messages, and
• zero, one, or more Protected traffic data VLANs that the instance protects
when the ring fails.
An ERP instance must be associated with a G.8032 physical ring and a G.8032
profile.
Example To enter the context of an instance named “blue”, use the following commands:
awplus(config)# g8032 erp-instance blue
awplus(g8032-config-switch)#
Related
commands
clear g8032 erp-instance
clear g8032 erp-instance statistics
data-traffic
erp-instance
g8032 forced-switch erp-instance
g8032 manual-switch erp-instance
level (g8032-switch)
physical-ring
profile name
raps-channel
Parameter Description
<erp-instance-name> The name of the G.8032 ERP instance. This can be up to 32
characters.
To Next Page
Loading...
Need help?
General
