C613-50631-01 Rev A Command Reference for IE340 Series 3325
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SECURE SHELL (SSH) COMMANDS
SHOW
CRYPTO KEY USERKEY
show crypto key userkey
Overview This command displays the public keys created on this device for the specified SSH
user.
Syntax
show crypto key userkey <username> [dsa|rsa|rsa1]
Mode User Exec, Privileged Exec and Global Configuration
Examples To show the public key generated for the user, use the command:
awplus# show crypto key userkey manager
To store the RSA public key generated for the user manager to the file “user.pub”,
use the command:
awplus# show crypto key userkey manager rsa > manager-rsa.pub
Output Figure 66-4: Example output from the show crypto key userkey command
Related
commands
crypto key generate userkey
Parameter Description
<username> User name of the local SSH user whose keys you wish to display. The
username must begin with a letter. Valid characters are all numbers,
letters, and the underscore, hyphen and full stop symbols.
dsa Displays the DSA public key.
rsa Displays the RSA public key used for SSH version 2 connections.
rsa1 Displays the RSA key used for SSH version 1 connections.
Type Bits Fingerprintď€
-------------------------------------------------------------ď€
rsa 2048 e8:d6:1b:c0:f4:b6:e6:7d:02:2e:a9:d4:a1:ca:3b:11ď€
rsa1 1024 12:25:60:95:64:08:8e:a1:8c:3c:45:1b:44:b9:33:9bď€
Table 4: Parameters in the output of the show crypto key userkey command
Parameter Description
Type The algorithm used to generate the key.
Bits Length in bits of the key.
Fingerprint Checksum value for the key.
To Next Page
Loading...
Need help?
General
