Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2293
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AUTHENTICATION COMMANDS
AUTH
-WEB-SERVER IP-CONFLICT-PREFER-NEWER-SUPPLICANT
auth-web-server
ip-conflict-prefer-newer-supplicant
Overview Use this command to alter the behavior of a Network Access Server (NAS) when it
detects a supplicant with a duplicate IP address.
The default behavior is for the NAS to not authorize the newer supplicant. This
command allows it to authorize the newer supplicant and unauthorize the original
supplicant.
This command applies to Web-based authentication supplicants only.
Use the no variant of this command to set the behavior back to default.
Syntax
auth-web-server ip-conflict-prefer-newer-supplicant
no auth-web-server ip-conflict-prefer-newer-supplicant
Default The default behavior is to not authorize the newer supplicant if the NAS detects a
duplicate IP address.
Mode Global Configuration
Usage notes Allied Telesis recommends you investigate and resolve the root cause of the
conflicting IP addresses.
Example To configure a NAS to authorize the newer supplicant, use the commands:
awplus# configure terminal
awplus(config)# auth-web-server
ip-conflict-prefer-newer-supplicant
Related
commands
auth-web enable
show auth
Command
changes
Version 5.5.2-0.1: command added

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English