Allied Telesis IE340 Series - show mls qos

C613-50631-01 Rev A Command Reference for IE340 Series 2150
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
SHOW
MLS QOS
show mls qos
Overview Use this command to display whether QoS is enabled or disabled on the switch.
Syntax
show mls qos
Mode User Exec and Privileged Exec
Example To display whether QoS is enabled or disabled, use the command:
awplus# show mls qos
Output Figure 42-3: Example output from the show mls qos command
Related
commands
mls qos enable
awplus#show mls qos
Enable