Allied Telesis IE340 Series - debug ipv6 ospf nfsm

C613-50631-01 Rev A Command Reference for IE340 Series 1237
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
DEBUG
IPV6 OSPF NFSM
debug ipv6 ospf nfsm
Overview This command enables debugging options for IPv6 OSPF Neighbor Finite State
Machines (NFSMs).
To enable all debugging options, specify debug ipv6 ospf nfsm with no
additional parameters.
The no and undebug variants of this command disable IPv6 OSPF NFSM
debugging. Use this command without parameters to disable all the options.
Syntax
debug ipv6 ospf nfsm [events] [status] [timers]
no debug ipv6 ospf nfsm [events] [status] [timers]
Mode Privileged Exec and Global Configuration
Examples To enable IPv6 debugging option to display timer information, use the following
command:
awplus# debug ipv6 ospf nfsm timers
Related
commands
terminal monitor
undebug ipv6 ospf nfsm
Parameter Description
events Displays NFSM event information.
status Displays NSFM status information.
timers Displays NFSM timer information.