Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 562
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SWITCHING COMMANDS
BACKPRESSURE
To disable backpressure flow control on interface port1.0.2, enter the following
commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# backpressure off
Related
commands
duplex
show interface
show running-config

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English