C613-50631-01 Rev A Command Reference for IE340 Series 3151
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
NTP COMMANDS
SHOW
NTP ASSOCIATIONS
st The stratum, which is the number of hops between the server and
the accurate time source such as an atomic clock.
t Type, one of:
u: unicast or manycast client
b: broadcast or multicast clientl: local reference clock
s: symmetric peer
A: manycast server
B: broadcast server
M: multicast server
when When last polled (seconds ago, h hours ago, or d days ago).
poll Time between NTP requests from the device to the server.
reach An indication of whether or not the NTP server is responding to
requests. 0 indicates there has never been a successful poll; 1
indicates that the last poll was successful; 3 indicates that the last
two polls were successful; 377 indicates that the last 8 polls were
successful.
delay The round trip communication delay to the remote peer or server, in
milliseconds.
offset The mean offset (phase) in the times reported between this local
host and the remote peer or server (root mean square, milliseconds).
disp The amount of clock error (in milliseconds) of the server due to clock
resolution, network congestion, etc.
Table 60-2: Parameters in the output from show ntp associations (cont.)
Parameter Description
To Next Page
Loading...
Need help?
General
