C613-50631-01 Rev A Command Reference for IE340 Series 2951
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF AUTHORIZATION
Related
commands
atmf authorize
atmf authorize provision
atmf secure-mode
clear atmf secure-mode certificates
show atmf
show atmf secure-mode
show atmf secure-mode certificates
Command
changes
Version 5.4.7-0.3: command added
Table 57-3: Parameters in the output from show atmf authorization provisional
Parameter Description
Area - Node Name
or MAC Address
MAC address or node name of the node that has been
provisionally authorized.
Interface Interface that the node has been provisioned on.
Start Time Time the node was provisioned.
Timeout Minutes Length of time from Start Time until the provisional
authorization expires.
To Next Page
Loading...
Need help?
General
