Allied Telesis IE340 Series - Page 2950

C613-50631-01 Rev A Command Reference for IE340 Series 2950
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF AUTHORIZATION
Output Figure 57-18: Example output from show atmf authorization pending
Output Figure 57-19: Example output from show atmf authorization provisional
Table 57-1: Parameters in the output from show atmf authorization current
Parameter Description
Node Name AMF node name of the authorized node.
Signer Name of the AMF master that authorized the node.
Expires Expiry date of the authorization. Authorization expiry time
is set using atmf secure-mode certificate expiry.
Pending Authorizations:

NZ Requests:
Node Name Product Parent Node Interface
------------------------------------------------------------------
area_1_node_3 x230-18GP master_1 port1.2.9
area_1_node_4 x510-52GTX master_1 sa1
Table 57-2: Parameters in the output from show atmf authorization pending
Parameter Description
Node Name Name of the node that is requesting authorization.
Product Product name.
Parent Node Authorization authority of the requesting node.
Interface Interface that the authorization request came in on.
ATMF Provisional Authorization:

Area - Node Name Start Timeout
or MAC Address Interface Time Minutes
------------------------------------------------------------------
3333.4444.5555 5 Sep 2016 02:35:54 3
1111.2222.3333 5 Sep 2016 02:35:24 60
NZ - blue port1.0.3 5 Sep 2016 02:35:06 60