Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1703
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IGMP AND IGMP SNOOPING COMMANDS
SHOW
IP IGMP PROXY GROUPS
Output Figure 32-6: Example output from show ip igmp proxy groups detail
Related
commands
show ip igmp proxy
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
awplus#show ip igmp proxy groups detail
Interface: vlan10
Group: 224.9.10.11
Group mode: Exclude
Member state: Delay
Source list is empty
Summary :
IGMP Connected Proxy Group Membership
Group Address Interface Member state
224.9.10.11 vlan10 DelayDetail :
Interface: vlan10
Group: 224.9.10.11
Group mode: Exclude
Member state: Delay
Source list is empty
Table 32-2: Parameters in the output of show ip igmp proxy groups
Parameter Description
Interface The interface that received the IGMP report.
Group The multicast group address that has been requested by the IGMP
report.
Group mode Includemode indicates that the multicast receiver has sent an
IGMPv3 report for a group with a list of addresses that it wants to
receive traffic from.
Exclude mode indicates that the multicast receiver has sent an
IGMPv3 report for a group with a list of addresses that it does not
want to receive traffic from.
Member state Delay indicates that no group or source query timers are running
for the specified group, otherwise the member state is shown as
Idle.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English