Allied Telesis IE340 Series - Page 121

C613-50631-01 Rev A Command Reference for IE340 Series 121
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CLI NAVIGATION COMMANDS
ENABLE
(PRIVILEGED EXEC MODE)
Exec mode. Users with a privilege level 6 or less need to enter a password to access
Privilege Exec mode. Use the enable password command or the enable secret
(deprecated) commands to set the password to enable access to Privileged Exec
mode.
awplus> enable 7
awplus#
Related
commands
disable (Privileged Exec mode)
enable password
enable secret (deprecated)
exit
service password-encryption
username