C613-50631-01 Rev A Command Reference for IE340 Series 2609
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OPENFLOW COMMANDS
OPENFLOW
FAILMODE
ignore timeout values of both idle timeout and hard timeout in existing
rules.
Example To set the fail mode to standalone mode, use the commands:
awplus# configure terminal
awplus(config)# openflow failmode standalone
To set the fail mode to secure non-rule-expired mode, use the commands:
awplus# configure terminal
awplus(config)# openflow failmode secure non-rule-expired mode
To revert the fail mode to the default mode, use the commands:
awplus# configure terminal
awplus(config)# no openflow failmode
Related
commands
openflow controller
Command
changes
Version 5.4.7-1.1: command added
Version 5.4.7-2.1: command added to IE300, IE500 series products
Version 5.4.8-0.1: non-rule-expired parameter added
Version 5.4.8-0.2: added to SBx908 GEN2
Version 5.4.8-1.1: added to IE210L series products
To Next Page
Loading...
Need help?
General
