Allied Telesis IE340 Series - Page 3028

C613-50631-01 Rev A Command Reference for IE340 Series 3028
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SWITCHPORT
ATMF-GUESTLINK
Example 3 To configure switchport port1.0.1 to be a guest link, using the default model type
and learning method address, use the following commands:
node1# configure terminal
node1(config)# int port1.0.1
node1(config-if)# switchport atmf-guestlink
Example 4 To configure switchports port1.0.1 to port1.0.3 to be guest links, for the guest class
camera, use the following commands:
node1# configure terminal
node1(config)# int port1.0.1-port1.0.3
node1(config-if)# switchport atmf-guestlink class camera
Example 5 To remove the guest-link functionality from switchport port1.0.1, use the following
commands:
node1# configure terminal
node1(config)# int port1.0.1
node1(config-if)# no switchport atmf-guestlink
Related
commands
atmf guest-class
discovery
http-enable
username (atmf-guest)
modeltype
show atmf links guest
show atmf guests