Allied Telesis IE340 Series - Page 3126

C613-50631-01 Rev A Command Reference for IE340 Series 3126
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP FOR IPV6 (DHCPV6) COMMANDS
IPV
6 ADDRESS DHCP
To stop the interface vlan2 from using DHCPv6 to obtain its IPv6 address, use the
commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ipv6 address dhcp
Related
commands
clear ipv6 dhcp client
ipv6 address
show ipv6 dhcp interface
show running-config