Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 879
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IP ADDRESSING AND PROTOCOL COMMANDS
IP
FORWARD-PROTOCOL UDP
To delete a UDP port from the UDP ports that the device forwards, use the
following commands:
awplus# configure terminal
awplus(config)# no ip forward-protocol udp <port>
Related
commands
ip helper-address
ip directed-broadcast
show running-config

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English