Allied Telesis IE340 Series - Page 1176

C613-50631-01 Rev A Command Reference for IE340 Series 1176
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPF COMMANDS
SHOW
IP OSPF
Related
commands
router ospf
Table 3: Parameters in the output of the show ip ospf command
Output Parameter Meaning
Route Licence: Route: Limit The maximum number of OSPF
routes which may be used for
forwarding.
Allocated The current total number of OSPF
routes allocated in the OSPF module.
Visible The current number of OSPF routes
which may be used for forwarding.
Internal The number of OSPF internal routes
used for calculating paths to ASBRs.
Number of external LSA The number of external link-state
advertisements
Number of opaque AS LSA Number of opaque link-state
advertisements