C613-50631-01 Rev A Command Reference for IE340 Series 1435
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
NEIGHBOR
DISALLOW-INFINITE-HOLDTIME
Examples
[BGP4+]
To enable the disallow-infinite-holdtime feature on the BGP4+ speaker with the
IPv6 address of 2001:0db8:010d::1, enter the commands:
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# neighbor
disallow-infinite-holdtime2001:0db8:010d::1
To disable the disallow-infinite-holdtime feature on the BGP4+ speaker with the
IPv6 address of 2001:0db8:010d::1, enter the commands:
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# no neighbor
disallow-infinite-holdtime2001:0db8:010d::1
Related
commands
neighbor timers
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
To Next Page
Loading...
Need help?
General
