Allied Telesis IE340 Series - Page 1877

C613-50631-01 Rev A Command Reference for IE340 Series 1877
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SMV6 COMMANDS
IPV
6 PIM RP-CANDIDATE
To use the ACL named G2 to specify the group prefixes that are advertised in
association with the RP address, use the following commands:
awplus# configure terminal
awplus(config)# ipv6 forwarding
awplus(config)# ipv6 multicast-routing
awplus(config)# ipv6 access-list standard G2 permit
2001:db8::/128
awplus(config)# ipv6 pim rp-candidate vlan2 group-list G2
Related
commands
ipv6 pim rp-address
ipv6 pim rp-register-kat