Allied Telesis IE340 Series - Page 1924

C613-50631-01 Rev A Command Reference for IE340 Series 1924
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
IP
PIM MAX-GRAFT-RETRIES
To configure PIM-DM on the VLAN interface vlan2 to send Graft message retries
forever, which is the default behavior, use the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ip pim max-graft-retries
Validation
Commands
show ip mroute
show ip pim dense-mode mroute
show running-config