Allied Telesis IE340 Series - Page 212

C613-50631-01 Rev A Command Reference for IE340 Series 212
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
FLOWCONTROL
HARDWARE (ASYN/CONSOLE)
Examples To enable hardware flow control on terminal console line asyn0, use the
commands:
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)# flowcontrol hardware
To disable hardware flow control on terminal console line asyn0, use the
commands:
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)# no flowcontrol hardware
Related
commands
clear line console
show running-config
speed (asyn)