C613-50631-01 Rev A Command Reference for IE340 Series 241
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
USERNAME
Default The privilege level is 1 by default. Note the default is not shown in running-config
output.
Usage notes An intermediate CLI security level (privilege level 7 to privilege level 14) allows a
CLI user access to the majority of show commands, including the platform show
commands that are available at privilege level 1 to privilege level 6. Note that some
show commands, such as show running-configuration and show
startup-configuration, are only available at privilege level 15.
Examples To create the user “bob” with a privilege level of 15, for all show commands
including show running-configuration and show startup-configuration and to
access configuration commands in Privileged Exec command mode, and the
password “bobs_secret”, use the commands:
awplus# configure terminal
awplus(config)# username bob privilege 15 password bobs_secret
To create a user “junior_admin” with a privilege level of 7, which will have
intermediate CLI security level access for most show commands, and the password
“show_only”, use the commands:
awplus# configure terminal
awplus(config)# username junior_admin privilege 7 password
show_only
Related
commands
enable password
security-password minimum-categories
security-password minimum-length
To Next Page
Loading...
Need help?
General
