Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2448
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RADIUS COMMANDS
SERVER
(RADIUS SERVER GROUP)
Default The default Authentication port number is 1812 and the default Accounting port
number is 1813.
Mode RADIUS Server Group Configuration
Usage notes The RADIUS server to be added must be configured by the radius-server host
command. In order to add or remove a server, the auth-port and acct-port
parameters in this command must be the same as the corresponding parameters
in the radius-server host command.
Examples To create a RADIUS server group ‘RAD_AUTH1’ for authentication, use the
following commands:
awplus# configure terminal
awplus(config)# aaa group server radius RAD_AUTH1
awplus(config-sg)# server 192.168.1.1 acct-port 0
awplus(config-sg)# server 192.168.2.1 auth-port 1000 acct-port
0
To create a RADIUS server group ‘RAD_ACCT1’ for accounting, use the following
commands:
awplus# configure terminal
awplus(config)# aaa group server radius RAD_ACCT1
awplus(config-sg)# server 192.168.2.1 auth-port 0 acct-port
1001
awplus(config-sg)# server 192.168.3.1 auth-port 0
To remove server 192.168.3.1 from the existing server group ‘GROUP1’, use the
following commands:
awplus# configure terminal
awplus(config)# aaa group server radius GROUP1
awplus(config-sg)# no server 192.168.3.1
Related
commands
aaa accounting auth-web
aaa accounting auth-mac
aaa accounting dot1x
aaa accounting login
aaa authentication auth-mac
aaa authentication auth-web
aaa authentication login
aaa group server
radius-server host

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English