C613-50631-01 Rev A Command Reference for IE340 Series 2598
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING INTERFACE
Related
commands
show ip dhcp snooping
show ip dhcp snooping statistics
show running-config dhcp
Table 58: Parameters in the output from the show ip dhcp snooping interface
command
Parameter Description
Port The port interface name.
Status The port status: untrusted (default) or trusted.
Full Leases The number of entries in the DHCP snooping database for the
port.
Max Leases The maximum number of entries that can be stored in the
database for the port.
Action The DHCP snooping violation actions for the port.
Subscriber
ID
The subscriber ID for the port. If the subscriber ID is longer than 34
characters, only the first 34 characters are displayed. To display
the whole subscriber ID, use the command show running-config
dhcp.
To Next Page
Loading...
Need help?
General
