C613-50631-01 Rev A Command Reference for IE340 Series 2618
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OPENFLOW COMMANDS
SHOW
OPENFLOW COVERAGE
Related
commands
show openflow status
show openflow flows
Command
changes
Version 5.4.6-1.1: command added
Version 5.4.7-1.1: command added to GS900MX, XS900MX, x550 series products
Version 5.4.7-2.1: command added to IE300, IE500 series products
Version 5.4.8-0.2: added to SBx908 GEN2
Version 5.4.8-1.1: added to IE210L series products
dpif_flow_del 0.0/sec 0.000/sec 0.1342/sec total: 516ď€
dpif_flow_put 0.0/sec 0.000/sec 0.0014/sec total: 5ď€
dpif_flow_flush 0.0/sec 0.000/sec 0.0000/sec total: 2ď€
dpif_port_add 0.0/sec 0.000/sec 0.0000/sec total: 25ď€
cmap_shrink 0.0/sec 0.000/sec 0.2939/sec total: 1157ď€
cmap_expand 0.0/sec 0.000/sec 0.0006/sec total: 3ď€
ttp_rev_flow_table 0.0/sec 0.000/sec 0.1050/sec total: 410ď€
ttp_rev_port_toggled 0.0/sec 0.000/sec 0.0000/sec total: 2ď€
ttp_rev_reconfigure 0.0/sec 0.000/sec 0.0006/sec total: 20ď€
xlate_actions 0.0/sec 0.000/sec 0.3969/sec total: 1530ď€
revalidate_missed_dp_flow 0.0/sec 0.000/sec 0.1356/sec total: 521ď€
handler_duplicate_upcall 0.0/sec 0.000/sec 0.1258/sec total: 483ď€
ofproto_update_port 0.0/sec 0.000/sec 0.0000/sec total: 29ď€
ofproto_recv_openflow 0.0/sec 0.000/sec 0.4111/sec total: 1573ď€
ofproto_queue_req 0.0/sec 0.000/sec 0.0003/sec total: 1ď€
ofproto_packet_out 0.0/sec 0.000/sec 0.0006/sec total: 4ď€
ofproto_flush 0.0/sec 0.000/sec 0.0000/sec total: 1ď€
bridge_reconfigure 0.0/sec 0.000/sec 0.0000/sec total: 19ď€
72 events never hit
Table 52-2: Parameters in the output from
Parameter Description
Event coverage The name of a coverage event
avg rate over
last: 5 seconds
The rate at which the event occurred for the last 5 seconds
last minute The rate at which the event occurred for the last one
minute
last hour The rate at which the event occurred for the last one hour
hash The name of the internal hash on the counter
total: The total number of occurrences of the event
events never hit The number of coverage events that have never occurred.
When the value is 0, this information is not displayed.