Allied Telesis IE340 Series - Page 2644

C613-50631-01 Rev A Command Reference for IE340 Series 2644
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VRRP COMMANDS
PRIORITY
The example below shows you how to configure 101 as the priority for VRRPv3 VR
ID 3 on vlan1:
awplus# configure terminal
awplus(config)# router ipv6 vrrp 3 vlan1
awplus(config-router)# priority 101
The example below shows you how to remove the configured priority for VRRPv3
VR ID 3 on vlan1:
awplus# configure terminal
awplus(config)# router ipv6 vrrp 3 vlan1
awplus(config-router)# no priority
Related
commands
circuit-failover
preempt-mode
Command
changes
Version 5.5.2-2.1: command added on 10GbE UTM Firewall and AR4000S-Cloud