C613-50631-01 Rev A Command Reference for IE340 Series 2665
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VRRP COMMANDS
VIRTUAL
-IP
The example below shows you how to set the virtual IPv4 address for VRRP VR ID 5
and the router as owner of the virtual IPv4 address:
awplus# configure terminal
awplus(config)# router vrrp 5 vlan2
awplus(config-router)# virtual-ip 192.0.2.30 owner
The example below shows you how to disable the virtual IPv4 address for VRRP VR
ID 5
awplus# configure terminal
awplus(config)# router vrrp 5 vlan2
awplus(config-router)# no virtual-ip
Related
commands
router vrrp (interface)
enable (VRRP)
vrrp vmac
Command
changes
Version 5.5.2-2.1: command added on 10GbE UTM Firewall and AR4000S-Cloud