Allied Telesis IE340 Series - Page 2731

C613-50631-01 Rev A Command Reference for IE340 Series 2731
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
SHOW
G8032 ERP-INSTANCE
Related
commands
data-traffic
erp-instance
g8032 erp-instance
level (g8032-switch)
physical-ring
profile name
rpl role
sub-ring
topology-change
trap (g8032-switch)
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.7-1.1: added to x310 series products
Version 5.4.7-2.1: added to x550 series products
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
East Sending or
West Sending
If this local node is not sending R-APS, then all the fields
are shown as "-"
Timers Wait-to-Restore - "Running" indicates this timer is active,
otherwise is "-".Wait-to-Block - "Running" indicates this
timer is active, otherwise is "-".Hold Off Timer - "Running"
indicates this timer is active, otherwise is "-".
Table 1: Parameters in the output from the show g8032 erp-instance
command. (cont.)
Parameter Description