Allied Telesis IE340 Series - Page 2737

C613-50631-01 Rev A Command Reference for IE340 Series 2737
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
SHOW
G8032 PROFILE
Related
commands
enable (g8032-profile)
g8032 profile
timer (g8032-profile)
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.7-1.1: added to x310 series products
Version 5.4.7-2.1: added to x550 series products
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
Wait-To-Block 5 seconds more than the configured Guard Time. The
range is 5010 to 5200.
ERP Inst Comma separated list of ERP instances using this profile,
or "-" if there are none.
Table 4: Parameters in the output from show g8032 profile command. (cont.)
Parameter Description