Allied Telesis IE340 Series - Page 2791

C613-50631-01 Rev A Command Reference for IE340 Series 2791
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
AMFPLUS-LICENSE-ONLY
Output Figure 57-1: Example using atmf amfplus-license-only
Related
commands
show atmf
Command
changes
Version 5.5.3-0.1: command added
ATMF Summary Information:
ATMF Status : Enabled
Network Name : gtnet
Node Name : node2
Role : Master
Restricted login : Enabled
Secure Mode : Disabled
Current ATMF Guests : 0
Current ATMF Nodes : 10
Total number of licensed nodes available is 22

node2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
node2(config)#atmf amfplus-license-only 
node2(config)#15:41:36 node2 ATMF[1041]: The number of nodes
allowed on this ATMF network is 12 

node2(config)#do show atmf
ATMF Summary Information:

ATMF Status : Enabled
Network Name : gtnet
Node Name : node2
Role : Master
Restricted login : Enabled
Secure Mode : Disabled
Current ATMF Guests : 0
Current ATMF Nodes : 10
Master is configured to allow only AMFPLUS Licenses
Total number of licensed nodes available is 12