Allied Telesis IE340 Series - Page 285

C613-50631-01 Rev A Command Reference for IE340 Series 285
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
NO
DEBUG ALL
To disable all NSM debugging, use the command:
awplus# no debug all nsm
To disable all OSPF debugging, use the command:
awplus# no debug all ospf
To disable all PIM Dense Mode debugging, use the command:
awplus# no debug all pim dense-mode
To disable all PIM Sparse Mode debugging, use the command:
awplus# no debug all pim sparse-mode
To disable all RIP debugging, use the command:
awplus# no debug all rip
To disable all VRRP debugging, use the command:
awplus# no debug all vrrp
Related
commands
undebug all
Command
changes
Version 5.4.7-1.1: pim dense-mode, pim sparse-mode, and rip parameters added