C613-50631-01 Rev A Command Reference for IE340 Series 2857
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
REMOTE-LOGIN
To close the session on Node20 and return to Node10’s command line, use the
following command:
Node20# exit
Node10#
In this example, user User1 is a valid user of node5. They can remotely login from
node5 to node3 by using the following commands:
node5# atmf remote-login user User1 node3
node3> enable
Related
commands
atmf restricted-login
Command
changes
Version 5.4.6-2.1: changes to AMF user account requirements
To Next Page
Loading...
