Allied Telesis IE340 Series - Page 2899

C613-50631-01 Rev A Command Reference for IE340 Series 2899
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
CREATE
(AMF-PROVISION)
Figure 57-6: Sample output from the show atmf backup command
For instructions on how to configure on a provisioned node, see the AMF Feature
Overview and Configuration Guide.
Related
commands
atmf provision (interface)
atmf provision node
clone (amf-provision)
copy (amf-provision)
configure boot config (amf-provision)
configure boot system (amf-provision)
delete (amf-provision)
identity (amf-provision)
license-cert (amf-provision)
locate (amf-provision)
show atmf provision nodes
Command
changes
Version 5.4.9-0.1: syntax change due to new AMF provisioning mode
device1#show atmf backup 

Scheduled Backup ...... Enabled
Schedule ............ 1 per day starting at 03:00
Next Backup Time .... 01 Oct 2018 03:00
Backup Bandwidth ...... Unlimited
Backup Media .......... USB (Total 7446.0MB, Free 7315.2MB)
Server Config ......... 
Synchronization ..... Unsynchronized
Last Run .......... -
1 .................. Unconfigured
2 .................. Unconfigured
Current Action ........ Idle
Started ............. -
Current Node ........ - 

---------------------------------------------------------------
Node Name Date Time In ATMF On Media Status 
---------------------------------------------------------------
device2 - - No Yes Prov 
device1 30 Sep 2018 00:05:49 No Yes Good 