Allied Telesis IE340 Series - Page 2939

C613-50631-01 Rev A Command Reference for IE340 Series 2939
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF AREA
Example 2 To show detailed information about the areas, use the command:
controller-1# show atmf area detail
The following figure shows example output from running this command.
Related
commands
show atmf area summary
show atmf area nodes
show atmf area nodes-detail
Table 65: Output from the show atmf area detail command
controller-1#show atmf area detail

ATMF Area Detail Information: 

Controller distance : 0 

Controller Id : 21 
Backup Available : FALSE 

Area Id : 2 
Gateway Node Name : controller-1
Gateway Node Id : 342 
Gateway Ifindex : 6013 
Masters Count : 1 
Master Node Name : well-master (329) 
Node Count : 2 

Area Id : 3 
Gateway Node Name : controller-1 
Gateway Node Id : 342 
Gateway Ifindex : 4511 
Masters Count : 2 
Master Node Name : cant1-master (15) 
Master Node Name : cant2-master (454) 
Node Count : 2 