C613-50631-01 Rev A Command Reference for IE340 Series 2990
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF LINKS GUEST DETAIL
Related
commands
atmf guest-class
discovery
http-enable
username (atmf-guest)
modeltype
switchport atmf-guestlink
show atmf backup guest
Command
changes
Version 5.5.0-1.1: Login Fallback parameter added
Device Type Model information for the guest node. This field shows the
model information that AMF retrieved from the guest
node. In contrast, the Model Type shows what a user
entered as the type of device they intended this guest
node to be.
Description By default, this is a concatenation of the guest node’s
parent node and the port to which it is attached. You can
change it by configuring a description on the port.
Serial Number The serial number of the guest node.
Firmware Name The name of the firmware operating on the guest node.
Firmware Version The version of the firmware operating on the guest node.
HTTP port The HTTP port as specified with the http-enable
command when defining a guest class. You can set this if
the guest node provides an HTTP user interface on a
non-standard port (any port other than port 80).
Table 57-2: Parameters in the output from show atmf links guest detail (cont.)
Parameter Description
To Next Page
Loading...
Need help?
General
