C613-50631-01 Rev A Command Reference for IE340 Series 3093
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
SHOW
COUNTER DHCP-SERVER
Related
commands
service dhcp-server
show ip dhcp binding
show ip dhcp server statistics
show ip dhcp pool
show ip dhcp server statistics
DHCPNAK out The number of Negative Acknowledgement messages sent by
the DHCP server. The server sends these after receiving a request
that it cannot fulfil because either there are no available IP
addresses in the related address pool, or the request has come
from a client that doesn’t fit the network setting for an address
pool.
BOOTREQUEST
in
The number of bootp messages received by the DHCP server
from bootp clients.
BOOTREPLY out The number of bootp messages sent by the DHCP server to bootp
clients.
Table 2: Parameters in the output of the show counter dhcp-server command
Parameter Description
To Next Page
Loading...
Need help?
General
