To Next Page

To Previous Page

C613-50631-01 Rev A Command Reference for IE340 Series 3108

AlliedWare Plus™ Operating System - Version 5.5.3-0.x

DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS

USE

-SUBSCRIBER-ID

Output Figure 58-17: Example output from show ip dhcp pool Campus-1

commands

ip dhcp pool

show ip dhcp pool

Command

changes

Version 5.5.2-0.1: command added

awplus#show ip dhcp pool Campus-1 

Pool Campus-1 : 

subscriber-id substitution for client-id is enabled 

network: 192.168.2.0/24 

address ranges: 

addr: 192.168.2.50 to 192.168.2.100 

static host addresses: 

addr: 192.168.2.5 Client-id: office-pc-21 

lease <1:0:0:0> 

subnet mask: 255.255.255.0 (pool's network mask) 

dns servers: 192.168.2.2 

default-router(s): 192.168.2.2 

Probe: Default Values 

Status: Enabled [Enabled] 

Type: Ping [Ping] 

Packets: 5 [5] 

Timeout: 200 msecs [200] 

Dynamic addresses: 

Total: 51 

Leased: 0 

Utilization: 0.0 % 

Static host addresses: 

Total: 1 

Leased: 1

Allied Telesis IE340 Series User Manual

Other manuals for Allied Telesis IE340 Series