Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3272
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LLDP COMMANDS
SHOW
LOCATION
The coordinate location information displayed may differ from the information
entered because it is stored in binary format. For more information, see the
location coord-location configuration command.
To display all ELIN location information configured on the switch, use the
command:
awplus# show location elin-location
Related
commands
location elin-location-id
location civic-location identifier
location civic-location configuration
location coord-location identifier
location coord-location configuration
location elin-location
Command
changes
Version 5.4.8-2.1: Command added to AR2050V, AR3050S, AR4050S
Table 71: Example output from the show location command
awplus# show location coord-location identifier 1
ID Element Type Element Value
--------------------------------------------------------------------
1 Latitude Resolution 15 bits
Latitude 38.8986481130123138427734375 degrees
Longitude Resolution 15 bits
Longitude 130.2323232293128967285156250 degrees
Altitude Resolution 10 bits
Altitude 2.50000000 meters
Map Datum WGS 84
Table 72: Example output from the show location elin-location command
awplus# show location elin-location
ID ELIN
-----------------------------------
1 1234567890
2 5432154321

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English