Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3378
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TRIGGER COMMANDS
SHOW
TRIGGER
To display counter information about all triggers use the command:
awplus# show trigger counter
Figure 67-4: Example output from show trigger counter
Date The date on which the trigger is permitted to activate. Only
displayed if configured, in which case it replaces “Days”.
Active Whether or not the trigger is permitted to activate.
Test Whether or not the trigger is operating in diagnostic mode.
Trap Whether or not the trigger is enabled to send SNMP traps.
Repeat Whether the trigger repeats an unlimited number of times
(Continuous) or for a set number of times. When the trigger can
repeat only a set number of times, then the number of times
the trigger has been activated is displayed in brackets.
Modified The date and time of the last time that the trigger was modified.
Number of
activations
Number of times the trigger has been activated since the last
restart of the device.
Last
activation
The date and time of the last time that the trigger was
activated.
Number of
scripts
How many scripts are associated with the trigger, followed by
the names of the script files in the order in which they run.
awplus# show trigger counter 
Trigger Module Counters
------------------------------------------------------- 
Trigger activations 4 
Last trigger activated 55 
Time triggers activated today 0 
Periodic triggers activated today 0 
Interface triggers activated today 1 
CPU triggers activated today 2 
Memory triggers activated today 1 
Reboot triggers activated today 0 
Ping-poll triggers activated today 0 
USB event triggers activated today 0 
Stack master fail triggers activated today 0 
Stack member triggers activated today 0 
Stack link triggers activated today 0 
ATMF node triggers activated today 0 
ATMF guest triggers activated today 0 
Log triggers activated today 0 
-------------------------------------------------------
Table 68: Parameters in the output of show trigger full and show trigger for a
specific trigger (cont.)
Parameter Description

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English