C613-50631-01 Rev A Command Reference for IE340 Series 3377
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TRIGGER COMMANDS
SHOW
TRIGGER
Table 67-3: Example output from show trigger full
awplus#show trigger full ď€
Trigger Configuration Detailsď€
------------------------------------------------------------ď€
Trigger ..................... 1 ď€
Name ........................ Busy CPU ď€
Type and details ............ CPU (80% up) ď€
Days ........................ smtwtfs ď€
Active ...................... Yes ď€
Test ........................ No ď€
Trap ........................ Yes ď€
Repeat ...................... Continuous ď€
Modified .................... Fri Feb 3 17:05:16 2017 ď€
Number of activations ....... 0 ď€
Last activation ............. not activated ď€
Number of scripts ........... 2 ď€
1. flash:/cpu_alert.sh ď€
2. flash:/reconfig.scp ď€
3. ď€
4. ď€
5. ď€
Trigger ..................... 5ď€
Name ........................ Regular status checkď€
Type and details ............ Periodic (30 min)ď€
Days ........................ smtwtfsď€
Active ...................... Yesď€
Test ........................ Noď€
Trap ........................ Yesď€
Repeat ...................... 5 (2)ď€
Modified .................... Fri Feb 3 17:18:44 2017ď€
Number of activations ....... 0ď€
Last activation ............. Fri Feb 10 18:00:00 2017ď€
Number of scripts ........... 1ď€
1. flash:/stat_check.scpď€
2. ď€
3. ď€
4. ď€
5. ď€
------------------------------------------------------------
Table 68: Parameters in the output of show trigger full and show trigger for a
specific trigger
Parameter Description
Trigger The ID of the trigger.
Name Descriptive name of the trigger.
Type and
details
The trigger type and its activation conditions.
Days The days on which the trigger is permitted to activate.