C613-50631-01 Rev A Command Reference for IE340 Series 369
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CONNECTIVITY FAULT MANAGEMENT COMMANDS
MEP
(FNG ATTRIBUTES)
Example To clear an alarm after the defect has been abated for 6 seconds, use the
commands:
awplus(config)# interface port1.0.2
awplus(config-if)# ethernet cfm mep down mpid 12 domain-name
MD-INST2 ma-name MA-INST2-1
awplus(config-if-eth-cfm-mep)# mep reset-fng-time 600
Related
commands
clear (MEP Attribute)
ethernet cfm domain-name
ethernet cfm mep
service ma-name
show mep-alarm status
Command
changes
Version 5.4.7-1.1: command added
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
To Next Page
Loading...
Need help?
General
