Allied Telesis IE340 Series - Page 399

C613-50631-01 Rev A Command Reference for IE340 Series 399
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CONNECTIVITY FAULT MANAGEMENT COMMANDS
SHOW
ETHERNET CFM SERVICE
Figure 9-12: Example output from show ethernet cfm service MA-INST2-1
domain MD-INST2 details
VLAN The Primary VLAN.
Defect A list of defects detected by the MA’s Local MEPs. The
defects shown can be:
1 - someRDIdefect is declared
2 - someMACstatusDefect is declared
3 - someRMEPCCMdefect is declared
4 - errorCCMdefect is declared
5 - xconCCMdefect is declared
awplus#show ethernet cfm service MA-INST2-1 domain MD-INST2
details

CFM Service Name................ MA-INST2-1
CFM Domain Name................. MD-INST2
CFM Domain Level................ 3
Primary VLAN.................... -

Maintenance Assoc Name Format... string
Maintenance Assoc Name Value.... MA-12V100
CCM Transmission Interval....... 1 second
Local MEPs...................... MEP DOWN 
12 (interface port1.0.2)

Configured Remote MEPs.......... 21
Missing Remote MEPs............. 21
Current MEP Defects............. 3 (someRMEPCCMdefect)
MIP Creation.................... None
Table 9-8: Parameters in the output from show ethernet cfm service
<ma-name> domain <domain-name> details
Parameter Description
CFM Service Name The Maintenance Associations (MA) instance name.
CFM Domain Name The Maintenance Domain name for the managed object.
CFM Domain Level The level of the domain.
Primary VLAN The Primary VLAN that was configured (if any).
Table 9-7: Parameters in the output from show ethernet cfm service (cont.)
Parameter Description