Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 436
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
LOG
EMAIL (FILTER)
Mode Global Configuration
Examples To create a filter to send all messages generated by EPSR that have a severity of
notices or higher to the email address admin@homebase.com, use the following
commands:
awplus# configure terminal
awplus(config)# log email admin@homebase.com level notices
program epsr
To create a filter to send all messages containing the text “Bridging initialization”,
to the email address admin@homebase.com, use the following commands:
awplus# configure terminal
awplus(config)# log email admin@homebase.com msgtext "Bridging
initialization"
To create a filter to send messages with a severity level of informational and
above to the email address admin@alliedtelesis.com, use the following
commands:
awplus# configure terminal
awplus(config)# log email admin@alliedtelesis.com level
informational
To stop the device emailing log messages emailed to the email address
admin@alliedtelesis.com, use the following commands:
awplus# configure terminal
awplus(config)# no log email admin@homebase.com
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to the email address admin@homebase.com, use the
following commands:
awplus# configure terminal
awplus(config)# no log email admin@homebase.com level notices
program epsr
To remove a filter that sends messages with a severity level of informational and
above to the email address admin@alliedtelesis.com, use the following
commands:
awplus# configure terminal
awplus(config)# no log email admin@alliedtelesis.com level
informational
Related
commands
default log email
log email
log email exclude
log email time
show log config

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English